SPECIFICATIONS

Raspberry Pi 4 Model B ABS Case Grid Cooling Shell with Cooling Fan Black Transparent Plastic Shell for Raspberry Pi 4

【Introduction】
This is the ABS case for Raspberry Pi . It has dual using way : use with cooling fan or use with 3.5 inch LCD ( but the fan and LCD can not use at the same time ). If you has or want to use 3.5 inch LCD , this case will be a good chice for you. Remove the cover of the case , you can install the 3.5 inch LCD ; use the cover , you can install the cooling fan.

【Specification】
1. Material : Plastic
2. Weight : 45g approx
3. Color : Black
4. Use for : Raspberry Pi 4 Model B
5. Dual use : Use with cooling fan or use with 3.5 inch LCD (can not use the fan and LCD at the same time).

【Feature】
1. One case for dual use , save money and space.
2. Support cooling fan , don't worry over heating.
3. Perfect fits for Raspberry Pi 4 Model B , remain most interface.
4. Plastic materail is stronger than acrylic , won't block the WiFi and bluetooth.
Install the Case with LCD
1. Put the Raspberry Pi 4 on the base of case.
2. Stick the pad between the Ethernet moudle and back of LCD
3. Plug the 3.5 inch LCD on the Raspberry Pi 4's GPIO (the GPIO pin must be aligned correctly)
4. Install the enclosure case.

【Packing list】

Only Case Option

1 x Black Case

Case with Fan Option
1 x Black Case
1 x Cooling Fan