Raspberry Pi Pico 2 W Microcontroller Board, Based on Official RP2350 Chip, 2.4GHz 802.11n WIFI and Bluetooth 5.2

Raspberry Pi Pico 2 W Microcontroller Board, Based on Official RP2350 Chip, 2.4GHz 802.11n WIFI and Bluetooth 5.2

$80.69

$80.69 $0.00

Description

SPECIFICATIONS

Battery Included: no

Bluetooth: Bluetooth 5.2

Brand Name: Waveshare

Flash: 4MB

High-concerned chemical: none

Model Number: Raspberry Pi Pico 2 W

Origin: Mainland China

SRAM: 520KB

Typical Application Fields: Education and Learning

WIFI: 2.4GHz 802.11n WIFI 4

processor: Dual-core ARM Cortex-M33 or dual-core Hazard3 RISC-V @150MHz

Description

Package Content

Raspberry Pi Pico 2 W Original

Raspberry Pi Pico 2 W x1

Raspberry-Pi-Pico-2-W-M

Raspberry Pi Pico 2 W with pre-soldered header (mono) x1
1*3PIN yellow pin header x1
USB-A to micro USB cable ~1.2m x1

Raspberry-Pi-Pico-2-W-CC

Raspberry Pi Pico 2 W with pre-soldered header (color-coded) x1
1*3PIN yellow pin header x1
USB-A to micro USB cable ~1.2m x1

Raspberry Pi Pico 2 W Microcontroller Board, Based on Official RP2350 Chip, Dual-core & Dual-architecture Design, Supports WIFI and Bluetooth, Various Development Kit Options

Raspberry Pi Pico 2 W

The next big tiny thing

Built Using RP2350 Microcontroller Chip Designed By Raspberry Pi

Board specifications

Raspberry Pi Pico 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.

Key features include:

RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
Onboard Infineon CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2
520KB of SRAM, and 4MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Temperature sensor
12 × Programmable I/O (PIO) state machines for custom peripheral support

Pico Comparison

Model	Pico 2 W	Pico 2	Pico W	Pico
processor	Dual-core ARM Cortex-M33 or dual-core Hazard3 RISC-V @150MHz		Dual-core ARM Cortex-M0+ @133MHz
SRAM	520KB		264KB
Flash	4MB		2MB
WIFI	2.4GHz 802.11n WIFI 4	-	2.4GHz 802.11n WIFI 4	-
Bluetooth	Bluetooth 5.2	-	Bluetooth 5.2	-
Security	Signed boot support, OTP storage for boot decryption key, and hardware SHA-256 accelerator, etc.		-
Peripherals	2 × UART 2 × SPI 2 × I2C 3 × ADC 1 × USB 1.1 and PHY 16 × PWM
	12 × PIO state machines		8 × PIO state machines
	1 × HSTX		-
GPIO pins	26

Version Options

Raspberry Pi Pico 2 W Original

Raspberry-Pi-Pico-2-W-M
Pico 2 W Original with pre-soldered header (mono)

Raspberry-Pi-Pico-2-W-CC
Pico 2 W Original with pre-soldered header (color-coded)

Kit Selection Guide

Pico 2 W Starter Kit

This kit includes the Raspberry Pi Pico 2 W with pre-soldered header (mono), an experimental board, jumper wires, and a clear Acrylic protection case, which is more convenient to get started and begin your DIY creations.

Pico 2 W Basic Kit

On the basis of the starter kit, this kit includes LCD1602 RGB Module, PIR motion sensor, RGB LED, alarm, single-joint potentiometer, and 5mm LED, etc. With the official tutorial, you can quickly get started with MicroPython programming.

Pico 2 W Evaluation Kit

On the basis of the starter kit, this kit includes Pico-LCD-1.3, Pico-10DOF-IMU and Pico-Dual-Expander, etc. Simply connect the Pico 2 W and these two Pico HAT to the GPIO expander board, you can quickly set up a fully functional evaluation platform and start your innovation journey.

Pico 2 W Sensor Kit

On the basis of the starter kit, equipped with entry-level Raspberry Pi Pico 2 W Sensor Kit which is including 15 common modules such as LED, button, buzzer, etc. All-in-one design, all modules are connected to Pico 2 W via PCB castellated holes, no soldering or wiring is required. Each module can be easily separated for individual use, offering more flexibility for your experiments and projects. Standard Raspberry Pi Pico 2 W header, plug-and-play, also comes with clear Acrylic protection case, this kit is your ideal choice to quickly build prototypes or explore the functionality of various sensors

The Raspberry Pi Pico Sensor Kit includes

Standard Raspberry Pi Pico 2 W header
1.5inch OLED Module
6-Axis Motion Sensor
Potentiometer Module
Photosensitive Resistor Module
Sound Sensor Module
RGB LED Module
Buzzer Module

VOC Sensor Module
IR Receiver Module
IR Transmitter Module
Button Module
LED Module
Temperature/Humidity Sensor Module
EEPROM Module
Motor Drive Module

C/C++, MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started

dual-core, dual-architecture

The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment