SPECIFICATIONS

The products which are suitable for electronic enthusiasts to study and repair circuits. We only guarantee that the products are in good condition before delivery, and cannot guarantee 100% success after installation. The installation of the circuit requires the buyer to have experience in the circuit, please read the product description carefully before payment.

Some buyers will have incorrect numbers or horizontal lines after welding. This is because the welding is incorrect, there is a short circuit or disconnection. It does not mean that there is a problem with the product. You just need to re-solder the product and try.

Batteries are not included in the accessories

Attention: The screws used for the shell are nylon screws, please refer to the picture.

There is a protective film on the shell. After the buyer receives it, he can tear it down from the top edge. After tearing off, the transparent shell will appear.

！！！This link has two sku options, one is the clock kit (not including the shell) and one is the shell only.

Please pay attention to the distinction！！！

PCB board size: Length: 81mm Width: 81mm

Working voltage: 5V (can be powered by mobile phone charger, power bank, USB port)

Microcontroller program: The program has been burned and installed for direct use

Package features:

60 LED simulated second walking, switchable with multiple LED dynamic pattern modes, capable of temperature measurement, precise travel time, power-off memory, alarm setting (can be turned on/off), physical light control (digital tube and LED brightness can be automatically adjusted with light intensity, can be turned on/off). This clock product can be used as home and company desktop art accessories. Clock components are suitable for electronic enthusiasts and makers to create kits.

Product features:

1. Made using the principle of digital tube display;

2. Using full plug-in components, the success rate of production is as high as 99.9%;

3. Made using the principle of digital tube display;

4. Six time animations that you will never tire of watching;

5. Four offline animations that are also great for gifting to people;

6. Time and temperature alternate display, no longer need to constantly check your phone to see temperature and time!

7. Carry an alarm clock reminder along the way, so you no longer have to worry about not being able to get out of bed;

8. With light control function, it can automatically adjust the brightness according to the environment (it can also be used as a night light);

Key function description: The specific adjustment method is described below

All the above functions can be achieved with just 2 buttons!! One mode key (S1) and one addition key (S2).

1. Addition key: Corresponding to the S1 key on the board, it can perform addition operations on time, alarm clock, light control, and rotation mode. Accumulate the value by 1 once.

2. Mode key: Corresponding to the S2 key on the board, it can switch to the setting state while the clock is displayed

Adjustment prompt:

Pattern selection (in the time display interface):

Press button S2 once to switch to the next LED rotation style;

Adjust settings (under the time display interface):

1. Press the S1 button to enter the time setting mode. At this point, the display area on the 2nd will flash, indicating that the time can be set. At this point, press the S2 button to set the time;

2. Press the S1 button again to enter the time setting mode. At this time, the display area of the 1 button will flash, indicating that the time can be set. At this time, press the S2 button to set the time;

3. Press the S1 button again to enter the set alarm score. At this point, the display area on the 2nd will flash, indicating that the alarm score can be set. At this point, press the S2 button to set the alarm score;

4. Press button S1 again to enter the alarm setting mode. At this time, the display area 1 will flash, indicating that the alarm can be set. Press button S2 to set the alarm;

5. Press button S1 again to enter the alarm on/off setting. At this time, display areas 1 and 2 will show 1 or 0. Press button S2 to turn on or off the alarm, where 1 is on and 0 is off;

6. Press button S1 again to enter the settings for turning on/off the light control. At this time, display areas 1 and 2 will show 1 or 0. Press button S2 to turn on/off the light control, where 1 is on and 0 is off.