SPECIFICATIONS

Product Introduction：

1. Digital display chip, LCD display screen, the test is more accurate, more reliable, and cost-effective.
2. Four test units: PSI, BAR, KPA KG
3. The button battery can be replaced.
4. Streamlined appearance design, more exquisite.

Specification:

●Range:0-150PSI or 0-10 Bar or 0- 10 Kgf/cm*or 0- 1000 Kpa
●Display:21 * 10mm LCD display
●Power:LR44 button battery
●Operating temperature:-5 ~50'C
●Reduce tire wear andextend tire life
●Increase fuel efficiency
●Improve vehicle handlingand safety
●Range:0-150PSI or0-10Bar or 0-10 Kgf/cm'or 0- 1000Kpa。LCD Light demonstration。Automatic shut-off. Engineering plastics shell

Helpful Hints:

●0 Press the "ON/UNIT/OFF" button. Wait for "0.0" PSIor "0.00" Bar or "0.00" Kgf/cm2 or "0" Kpa display andbleep sound.
●Place the nozzle of the gauge over the tyre valve. Pressfirmly toensure good seal and prevent air secaping.
●Hold gauge on the valve until the readingon the LCDdisplay locks.
●Remove the gauge quickly from the valve and readpressure.
●To retake the reading simply place the nozzle over thetyre valveagain and repeat.
●Gauge will automatically shut off 20 or 60 seconds afteruse. Gaugecan be manually turned off by holding the"ON" button down for more than 3 seconds.
●In order to get a good seal,please put the tire's air nozzle was up or off to the side.
It's best when the nozzle is ar ound the 6 or 7 o'clockposition So that you can firmly press the gauge straightdown. This means you have to crane your head a bit toread the digital measurement, but the important thing isto be able to press down straight & hard onto the tire'snozzle
●This product does not contain batteries. If you receive the product, the product does not work, there is no battery inside, you need to buy a 3*LR44 button battery and install it before you can use it.

Packing list:

1*Digital tire pressure gauge (TG105, TG205, R-6802 optional)