SPECIFICATIONS

Brand Name: diymore

Choice: yes

High-concerned chemical: none

Material: Mixture

Origin: Mainland China

Output: Analog Sensor

Theory: Inductance Sensor

Type: Optical-Electronics Sensor

is_customized: Yes

Features
1. Supports 3-30V wide voltage input, compatible with various device power requirements
2. Maximum 2A output current, reliably drives low-power appliances like LED strips
3. Blue indicator light illuminates/extinguishes with switch status, providing real-time device operation feedback
4. 3P standard connector for quick wiring, no complex debugging required
5. Precisely senses different panel materials including acrylic, metal, and thin wood panels

Parameter
Input Voltage: 3-30V
Output Current: 0-2A
Sensing Distance: 6-8mm
Power-On Output Voltage: = Power Supply Voltage
Standby Output Voltage: 0V
LED Color: Blue
Power-On Status: LED On
Standby Status: LED Off
Power Input: Red Wire
Negative Terminal: Black Wire
Output Terminal: Yellow Wire
Port: 3P 1.25mm

Product Description
The module supports 3-30V input voltage control with a maximum output current of 2A. Commonly used for touch switch control in various acrylic panels, enclosures, and thin wood panels, it can directly drive low-power appliances, light strips, LED lights, and similar devices.

ABC Three-Point Description
A (Default: No 0R Resistor): Output state selection after power-on
- Without 0R resistor at Point A: Output is off after power-up
- With 0R resistor at Point A: Outputs voltage immediately after power-up
B (Default with 0R resistor): Latch Mode / Momentary Mode
- With 0R resistor at Point B: Latch Mode (Press once to turn on/off)
- Without 0R resistor at Point B: Momentary Mode (Output when touched, no output when released)
C: Sensitivity Adjustment
Adjusts touch sensing distance. Default is maximum distance (7-8mm). To reduce sensitivity, install a 1~50 pF capacitor based on actual conditions. Smaller capacitors increase sensitivity; larger capacitors decrease sensitivity. PCB default capacitor is 6 pF.

Package include
Module*1+Wire*1