TPIC6C596 8-bit Shift Register 7-Segment Digital Tube Driver Displays Module for Andrino Diy Electronic PCB Board

TPIC6C596 8-bit Shift Register 7-Segment Digital Tube Driver Displays Module for Andrino Diy Electronic PCB Board

$11.75

$11.75 $0.00

Description

SPECIFICATIONS

Application: Computer

Brand Name: EC Buying

Condition: New

Dissipation Power: 6.5" 7-Segment LED Display Module

High-concerned chemical: none

Operating Temperature: low

Origin: Mainland China

Package: Module

Smart Electronics Experiment: Switch And Sensor For Arduino STM32

Supply Voltage: DC 5V

Type: Voltage Regulator

is_customized: Yes

The TPIC6C596 is an 8-bit D-type shift register with serial input parallel output, parallel output with buffer control, and clear control. Multiple modules can be cascaded. Can be used to drive digital tube, saving microcontroller IO port. The 8-bit parallel output port is connected to the current limiting resistor and can be no longer connected externally.

Parameter:

Working temperature: -40 ~ 125 ° C
Power supply: 4.5 ~ 5.5V
Serial clock frequency: up to 10MHz
Open drain MOS driver tube VDS(ON)=0.5V, maximum IDS=90mA

SER: SER_IN serial data input on the IN side of the board

SER: SER_OUT serial data output on the OUT side of the board

5V: chip VCC power supply 5V

12V: The anode power supply end of the digital tube or other LED display device is connected to the pin or pad and then connected to a power supply. This pin does not output 12V, just a connection point. The external power supply can be other voltage values, according to the specific LED. Display device power supply requires power; this pin or pad can also be disconnected

CLK: SRCK serial shift register clock input

LAT: RCK parallel register clock input

A, B, C, D, E, F, G, DP: parallel data output, open drain output