SPECIFICATIONS

All-metal gear servo
Note: The PWM signal given to the servo determines the servo angle, 270° servo is at 500-2500us.
All-metal gears, strong wear resistance, wide range of applications
Good stability, high accuracy, quick response, controllable angle
Mechanical specifications
External dimensions: 22.4*12.5*22.8mm
Limit angle of mechanism: 200°sh 5°
Output shaft: 20T diameter: 4.9mm
Gear material: metal teeth

Electrical Characteristics
Operating voltage: 4.8V-6V
No-load speed: 0.1 1sec/60°
No-load current: 220mA/6V
Stall torque: 2.2Kg-cm/6V
Stall current: 800mA+ 10%
Static current: 5mA-6mA
Control Characteristics
Control signal: Pulse width modification
Control system type: Analog controller
Midpoint position: 1500usec
Pulse width range: 500 ~ 2500usec

Specification:
Storage Temperature Range: -30°C～80°C
Operating Temperature Range: -25°C～70°C
umidity Range: 65%±10%
Size:22.7*12.2*26.8
Gear type: 5 Metal
Limit angle: 90/180/270/360°
Bearing: No
Horn gear spline: 20T Diameter: 4.8mm, Height:4.3mm
Horn type: Plastic, POM
Case: Engineering plastics(PBT)
Connector wire: 250mm±5mm
Motor: Carbon brush motor
Splash water resistance: No

Operat voltage 4.8V 6.0V
Idle current ≤40mA ≤40mA
No load speed 0.11sec/60° 0.09sec/60°
Runnig current ≤200mA ≤300mA
Peak stall torque 1.6kg.cm 1.8kg.cm
Running torque 1.2kg.cm/60° 1.4kg.cm/60°
Stall current Max 580mA Max800mA
Command signal: Pulse width modification
Amplifier type: Digital controller
Pulse width range: 500～2500usec
Neutral position: 1500usec
Running degree: 90/180/270°±3°(when 500～2500usec)
Running degree: 45/90/135°±3°(when 500～1500usec)
Running degree: 45/90/135°±3°(when 2500～1500usec)
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000～2000usec)

Ouptput:
Red wire: Positive +
Black wire: Negative -
Brown wire: Signal S