Waveshare SIM7000E NB-IoT / Cat-M / EDGE / GPRS HAT for Raspberry Pi, GNSS, for Europe, Africa, Australia, Southeast Asia

Waveshare SIM7000E NB-IoT / Cat-M / EDGE / GPRS HAT for Raspberry Pi, GNSS, for Europe, Africa, Australia, Southeast Asia

$279.60

$279.60 $0.00

Description

SPECIFICATIONS

Battery Included: no

Brand Name: Waveshare

Choice: yes

High-concerned chemical: none

Model Number: SIM7000E NB-IoT HAT

Origin: Mainland China

Typical Application Fields: Consumer Electronics

semi_Choice: yes

DESCRIPTION：

Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.

SIM7000E is mainly applicable in Europe, Africa, Australia, Southeast Asia, SIM7000C is mainly applicable in Asia-Pacific region.
Please check the supported bands according to your local service provider, select the proper one when placing order.

SIM7000E NB-IoT / Cat-M / EDGE / GPRS HAT For Raspberry Pi, GNSS Positioning, For Europe, Africa, Australia, Southeast Asia

NB-IOT / CAT-M / GPRS / GNSS HAT

Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi

Based on SIM7000E

This is a telecommunication HAT for Raspberry Pi which supports NB-IoT, Cat-M, EDGE, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.

Features At A Glance

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
SIM card slot, compatible with both normal SIM card and NB-IoT specific card
2x LED indicators, easy to monitor the working status
Baudrate: 300bps~3686400bps
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

NB-IOT / CAT-M / 2G
Band	NB-IoT/Cat-M: FDD-LTE B3/B8/B20/B28
Band	GPRS/EDGE: 900/1800 MHz
Data rate	NB-IoT: 34(DL)/66(UL)
	Cat-M: 300(DL)/375(UL)
	EDGE: 236.8(DL)/236.8(UL)
	GPRS: 85.6(DL)/85.6(UL)
SIM card support	NB-IoT: NB Specific (Not Included)
SIM card support	Cat-M/GPRS/EDGE: Normal SIM (Not Included)
Applicable region	Europe, Africa, Australia, Southeast Asia
GNSS
Satellite systems	GPS, BeiDou, GLONASS, Galileo
Receiver type	16-channel
Receiver type	C/A Code
Sensitivity	Tracking: -162 dBm (GPS) / -157 dBm (GLONASS) / TBD (BD)
Sensitivity	Cold starts: -148 dBm
Time-To-First-Fix	Cold starts: <35s
Time-To-First-Fix	Hot starts: <1s
Accuracy	Position: <2.5m CEP
OTHER
Power supply	5V
Operating voltage	5V / 3.3V (3.3V by default)
Sleep Mode current	1.2mA (@DRX=2.56s)
Power Save Mode current	9uA
Operating temperature	-40°C ~ 85°C
Storage temperature	-45°C ~ 90°C
Dimensions	30.2mm x 65mm

Standard Raspberry Pi 40PIN GPIO

Compatible With Raspberry Pi Series Boards

NB-IoT / Cat-M / EDGE / GPRS Support

Cloud Communication

Supports Communication Protocols Including
TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail...

GNSS Positioning

Supports GPS, BeiDou, GLONASS, Galileo Positioning

What's On Board

SIM7000E
SPX29302 power chip
RT9193-33 power chip
Raspberry Pi GPIO header
for connecting with Raspberry Pi
USB interface
for testing AT Commands, getting GPS positioning data, etc.
SIM7000E control interface
for connecting with host boards like Arduino/STM32
SIM card slot
supports 1.8V/3V SIM card
GNSS antenna connector
LTE antenna connector

Network status indicator
Power indicator
Operating voltage selection jumper
configured via 0Ω resistor jumper
A: set operating voltage as 5V
B: set operating voltage as 3.3V (default)
DTR configuration jumper
configured via 0Ω resistor jumper
A: DTR is controlled by the Raspberry Pi P26 pin
B: NC (default)
PWR configuration jumper
configured via 0Ω resistor jumper
A: startup/shutdown by the Raspberry Pi P4 pin
B: auto startup on power-up (default)