XCR3D 3D Printer Part 100k ohm B3950 NTC Thermistor Temperature Sensor HT-NTC100K 1 Meter 1.5m 2M Cable with Plug Connector

XCR3D 3D Printer Part 100k ohm B3950 NTC Thermistor Temperature Sensor HT-NTC100K 1 Meter 1.5m 2M Cable with Plug Connector

$8.42

$8.42 $0.00

Color HT Glass 2M Cable HT Thermistor HT Glass 1M Cable HT-NTC 1M Cable HT-NTC 2M Cable Glass Thermistor Glass head 1M Cable HT Glass Thermistor Glass head 2M Cable

Description

SPECIFICATIONS

Brand Name: XCR3D

Choice: yes

High-concerned chemical: none

Item Type: Thermistor

Model Number: Plug Connector Thermistor

Origin: Mainland China

semi_Choice: yes

Pay attention:

We have 6 types of this Thermistors;

1. 10cm NTC100K female head with 1 meter male cable;

2. 10cm NTC100K female head with 1.5 meter male cable;

3. 10cm NTC100K female head with 2 meter male cable;

4. 10cm HT-NTC100K female head with 1 meter male cable;

5. 10cm HT-NTC100K female head with 1.5 meter male cable;

6. 10cm HT-NTC100K female head with 2 meter male cable;

Please make sure what is type of your choice, check it again when you pay it.

We design these optimized version thermistor to meet the requirement of the market, especially for the 3D printer manufacturers'. With these optimized thermistor, it's easy and convenient to replace the thermistor if they are not work. The connector wiring are stable.

Specifications:

Negative temperature coefficient (NTC) thermistor

R @ 25: K100K-1%

B25/50: K3950-1%

Element: thermistor type MJB2

Characteristics:

(1) Electrical Characteristics

A: resistance value: R (25 ° C) = 100K ± 1%

B: B value: B = 3950 ± 1%

C: Insulation resistance 50MΩ or more DC500V megger (between glass and lead

(2) Thermal time constant (τ): Τ≤10 17S (in still air)

(3) Operating temperature range:-50° C ~+ 260 ° C

Compared to other similar products in the market, it has following features:

1. It adopts white high temperature Teflon wire, resistant to high temperatureof 200 degrees;

2. For customers' convenience, 1M Teflon wire adopts doubling, so that the customers can tear the wire to use according to their need;

3. Teflon wire is twice thicker than other similar products in the market. It is not easy to be break off.

About HT-NTC100K Thermistor

Specifications: Negative Temperature Coefficient (NTC) Thermistor

Type: B3950

Temperature measurement head size: 3 * 15mm

No need to change the firmware program to directly replace the original thermal resistor

Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.

The improvements compared to the other temperature resistance in the market.

1. Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.

2. The temperature measurement range is increased from -50 ℃~ +250℃ to -50 ℃ ~ +320 ℃. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.

3. The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.

4. HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.

Free Shipping Over $199